66
buckle
storage
Aircraft
Seat Belt
buckle
storage
Aircraft
Seat Belt
Forward-facing
Belt Path
Opening
Access
Flap
Forward-facing Aircraft Installation
Installing Child Restraint in Aircraft
IMPORTANT:
Before installing the child restraint, make
sure the
aircraft seat is in a fully upright position.
Note:
You may need to route the Lower Anchor
Connector Assembly through the rear-facing belt path,
if it interferes with the aircraft seat belt (p. 25-26). After
landing, refer to page 36 for vehicle installation.
1. Place the child
restraint in
position.
Adjust the
child restraint
to its most
upright position
(Recline
Position #3, p.
62), then place
it
on the aircraft
seat forward-
facing.
2. Route aircraft seat belt through forward-facing belt
path.
Move the child restraint’s harness out of the way
and raise the access flap. Route the aircraft seat belt
buckle through the forward-facing belt path opening
on one side and continue through the opening on the
opposite side of the child restraint, as shown above.
