SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
2
SPECIFICATIONS
SAFETY AND OPERATION RULES
1
2
3
4
5
6
7
9
8
10
11
12
Read carefully and understand operator manual before
operate this product. Read and understand engine manual
prior to operation. Follow all warnings and instructions.
Know your equipment. Consider the applications, limitations
and the potential hazards specific to your unit.
Equipment must be placed on a firm, supporting surface.
Load must be kept within rating stated on generator
nameplate. Overloading will damage the unit or shorten
its life.
Engine not to be run at excessive speeds. To operate
an engine at excessive speeds increases the hazard of
personal injury. Do not tamper with parts which may increase
or decrease the governed speed.
To prevent accidental starting, always remove the spark
plug or cable from the spark plug before maintaining the
generator or engine.
Units with broken or missing parts, or without protective
housing or covers, should never be operated. Contact your
service center for replacement parts.
Units should be not operated or stored in wet or damp
conditions or highly conductive locations such as metal
decking and steel work.
SAFETY INFORMATION
DANGER
indicates a
potentially hazardous situation
which, if not avoided, WILL
result in death or serious injury.
WARNING
indicates a
potentially hazardous situation
which if not avoided could result
in death or serious injury.
CAUTION
indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate personal injury, or
property damage.
DANGER
WARNING
CAUTION
Keep the generator clean and free of oil and other
foreign matter.
Extension cords, power cords, and all electrical
equipment must be in good conditions. Never
operate electrical equipment with damaged or
defective cords.
Store the generator in a well ventilated area with
the fuel tank empty. Fuel shall not be stored near
the generator.
Your generator should never be operated
under these conditions:
• Uncontrolled change in engine speed.
• Electrical output loss.
• Overheating in connected equipment.
• Sparking
• Damaged receptacles
• Engine starting failure
• Excessive vibration
• Flame or smoke.
• Enclosed compartment.
• Rain or inclement weather. Do not let the unit get
wet when operating.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX
