Wiring Diagrams V22.3
16
EVA Piezo3
| Wiring Diagram Piezo3
to SP-DR-DMX-4CH
(EVA RGBW LED driver)
Article: EVA-PIEZOSQ3-AMB-X
Please note! Always check the Piezo wiring (conductor) colors and the 12Vdc
polarity before installation
L: 81 mm
H
: 81 m
m
2
3
1
Set the 4-channel EVA LED Driver (SP-DR-DMX-4CH), to which the Piezo Controller is being connected, to Master mode (rotary address 600).
Connect the other lights via DMX in/out. Set these to Slave mode (rotary address 001).
Operation of the Piezo switches is then as follows:
Piezo 1: light scene NEXT
Piezo 2: light scene PREVIOUS
Piezo 3: ON/OFF
Sequence scenes: White/Sky Blue/Blue/Mediterranean Blue/Green/Red/Purple/Colour Show Fade/Colour Show Jump
For cable extension, use data cable with minimum conductor size 7x0,5mm2 and with a maximum cable length of 30 meters. Recommended cable type LiYY
7x 0,5mm2 (Lapp Unitronic) or equal.
Summary of Contents for EVA-PIEZOSQ3-AMB-X
Page 4: ...Wiring Diagrams V22 3 4...
Page 6: ...Wiring Diagrams V22 3 6...
Page 11: ...Wiring Diagrams V22 3 11...
