EVA EVA-PIEZOSQ3-AMB-X, Wiring Diagrams

Page: 7 / 16

Wiring Diagrams V22.3 7
1
32
EVAstream Piezo PCB | Settings
Article: SP-PIEZO-ADV-PCB / SP-PIEZO-PSU-ADV
Stream controller V1
Rotary Switch Settings
CONFIG 1x
Piezo
2x
Piezo
3x Piezo
Basic
3x Piezo
Training
Rotary 3 8 1 1 1
Rotary 2 1 0 0 3
Rotary 1 5 6 9 9
Slave mode: External master (DMX
Advanced Controller) control*
Rotary = dmx address 1-511
PPM output 1-2 to EVAstream motor control
Piezo 1 + 3 is pauze
Piezo 1 = speed +
Piezo 3 = speed -
Piezo 2 = on/off funtion
When no start/stop switch in pool, place a bridge
over sw/sw (piezo 2)
When using an EVA DMX controller as master,
use DMX start address 5
*Combining a DMX Advanced Controller with
Piezo is only possible with a Piezo Ready Motor
Control Unit (Art.no: EVA-SP-xxx-MCU-PIEZO)
Master mode: piezo control
DMX in/out goes to EVAstream/UWL (underwater lighting) DMX input
Piezo/switch 4 = stop (reset) outside pool
Rotary (dmx) address 518 = 1 x piezo (1) control in 10% steps + (0, 30, 40, 50, 60, 70, 80, 90, 100)
When no start/stop switch in pool, place a bridge over sw/sw (piezo 2)
Rotary (dmx) address 601 = 2 x piezo (1+3) piezo 1 = speed +, piezo 3 = speed -, piezo 1+3 = on/standby. In standby piezo 3 = off
Rotary (dmx) address 901 = 3 x piezo (1+2+3) piezo 1 = speed +, piezo 2 = on/standby, piezo 3 = speed -. In standby piezo 3 = off
Rotary (dmx) address 931 = 3 x piezo (1+2+3). Step 1 = select user (piezo 1 or 2 or 3). Step 2 = select training
(piezo 1 or 2 or 3 --> make selection within 5 seconds otherwise step 2 is skipped, automatic proceeding to step 3)
* In training mode (step 2) piezo 1 = speed +, piezo 2 = standby, piezo 3 = speed -. In standy piezo 3 = off
* In stap 3 (stap 2 skipped) piezo 1 = speed +, piezo 2 = standby, piezo 3 = speed -. In standby piezo 3 = off
When using rotary (dmx) address 901/931, connect underwater lighting (UWL) to DMX in/out. Control UWL, see below:
UWL control: piezo 1+3 = switch colour, piezo 1+2 = light intensity -, piezo 2+3 = light int
DMX start address (UWL and EVAstream) in master mode: UWL= dmx channel 1, EVAstream= dmx channel 5
Wire colour for each Piezo type different
Couleur de fil différente pour chaque type de piézo
Color de cable diferente para cada tipo piezoeléctrico
Aderfarbe per Piezo Typ unterschiedlich
Aderkleur per Piezo type verschillend