EVA EVA-PIEZOSQ3-AMB-X, Wiring Diagrams

Page: 14 / 16

Wiring Diagrams V22.3 14
EVA RGBW LED driver | Wiring Diagram LED driver 4+2 channel for EVA RGBW lighting
Article: SP-DR-DMX-4CH
Connect wires according to schematics below, use wire colors as indicated:
Master Mode:
First print (master) = Rotary address 605:
Piezo 1: light scene NEXT
Piezo 2: light scene PREVIOUS
Piezo 3: ON/OFF
Use Piëzo 1 SW 11/12 for controlling by pulse, remote control, ,
Piëzo or domotica.
Sequence scenes (with scene memory):
White/Sky Blue/Blue/Mediterranean/Green/Red/ Purple/Colour
Show Fade/Colour Show Jump
Next prints (slaves) = Rotary address 001 – 511 (slave mode)
ATTENTION: The automatic start-up procedure takes approx.
30 seconds. During this procedure the lights will first light up
blue (softly). After that they will flash white. Start-up
procedure is ready now.
Alternative Master mode
600:
no scene memory
615:
sequence scenes (with scene memory): White/Sky
Blue/Blue/Mediterranean/Green/Red/ Purple/Colour
Show Fade/Colour Show Jump/OFF
Status leds
Orange : DMX is connected or PCB set as Master
Green flashing with high sequence: Starting software on PCB|
Green flashing with sequence of 1 sec: PCB is ready.
Red : An Issue has occurred. (please check the webapp (via WIFI) for
the event details
)
External DMX512 control
All PCB’s DMX address 001 to 511
Depending on the DMX programming
Mostly address 001 at all PCB.
Examples, in combination with:
- EC2 DMX controller: 001
- EVA-AA-77 AND EVA-AA-77SL with standard program:
001
- EVAstream: 001
If there occur problems with the operation of the PCB, you can read
the PCB via WIFI. See manual WIFI Connection.
1
Wire colour for each Piezo type different
Couleur de fil différente pour chaque type de piézo
Color de cable diferente para cada tipo piezoeléctrico
Aderfarbe per Piezo Typ unterschiedlich
Aderkleur per Piezo type verschillend