Overview
This guide will take you from the boxes to your first ride. We assume your dealer has not
performed any pre-assembly, but some dealers do much of the work for you. They may
have packaged your system differently, might have performed part of the assembly, and
might have included accessories such as a third-party speedometer or light set. Those
items should have their own documentation. This guide covers installation and assembly
of the equipment supplied by EV Depot with your hub motor system.
Your safety
If you are not confident of your ability to assemble a safe, properly adjusted bike, please
take it to a bike shop now along with these instructions. The charge is minimal ($35-$60)
and it will take a professional less than an hour to do the job correctly. If you cannot
assemble a battery pack per these instructions, you must order a pre-wired kit.
We have prepared these instructions to make the installation of your hub motor
conversion kit as fast and worry-free as possible. If you are not confident in your ability
to assemble a safe, properly adjusted bike, please take it to a bike shop now, along with
these instructions.
Required tools
Scissors or wire snips
Crescent or 17mm
wrench
11/32” wrench
Phillips-head
screwdriver
3mm hex wrench
Unpack
Open the boxes and identify
all the parts with the Kit
Contents list below.
Crystalyte Hub Motor Kit Home Assembly Guide
2006 EV Depot, a Priority Fulfillment and Distribution, LLC Company
2 of 20
