6
Load the wire with solder. Overloading the wire with solder will help keep the
heat in the wire rather than the battery terminal in the next step.
7
Load the soldering iron tip with a drop of solder. Place the solder-laden wire onto
the battery terminal. Touch the soldering iron to the wire. The drop of solder on
the tip will facilitate rapid heat transfer into the wire then onto the battery
terminal. As soon as the solder begins to flow on the terminal, remove the iron.
Too much heat on a terminal will destroy your batteries!
Crystalyte Hub Motor Kit Home Assembly Guide
2006 EV Depot, a Priority Fulfillment and Distribution, LLC Company
12 of 20
