14
Using filament tape (strapping tape), tightly secure the batteries to each other. Be
sure to run the wires so that they do not cross each others’ paths or touch a
battery terminal. If they cross paths, vibration may, over time, cause the
insulation to wear. The result could smoke from melting insulation, severely
degraded performance, and one or more ruined batteries.
15
Put each pair of batteries in a side of the pannier bag. The key switch and charger
port normally go on the left side. Close the zippers with the cross-connect wires
that run to the opposite side pannier to the front of the bag.
Crystalyte Hub Motor Kit Home Assembly Guide
2006 EV Depot, a Priority Fulfillment and Distribution, LLC Company
16 of 20
