Seite 20
Comet WiFi
NOTE: To reach the lower button in the battery compartment, use the small
tool supplied or a similarly thin object (e.g. paper clip).
9. FURTHER FUNCTIONS
DISPLAY ORIENTATION:
Depending on the positioning of your radiator valve, it may be necessary to rotate the display on your controller by
180°. To do this, go to the “Settings” menu item in the app. Here you can rotate the display of your Comet WiFi.
BUTTON LOCK:
To protect against unauthorized operation of your controller, you can block Comet WiFi. You can activate/deactivate the
key lock in the app under the menu item “Settings“. The button lock on the thermostat can also be activated/deactiva-
ted. To activate the key lock, hold down the two arrow keys for a few seconds. An animation appears on the display.
To deactivate the key lock, hold down the two arrow keys for a few seconds until the animation has been completely
stopped.
FROST AND LIME PROTECTION FUNCTION
The antifreeze and limescale protection functions are automatically active.
Frost protection function: If the temperature drops below 8°C, the display shows “--“. In this case, Comet WiFi opens
the valve until the temperature rises above 8°C again. Thus, freezing of the radiator prevented. Limescale protection
function:
To prevent the radiator valves from calcifying, Comet WiFi carries out a lime protection trip every Friday at 11:00 a.m.
MANUELLE OPERATION:
The room temperature can be changed manually at any time using the touch buttons on the Comet WiFi. If the heating
profile is activated, this manually set temperature remains until the next switching point. Then Comet WiFi switches
back to the programmed heating profile.
PAIRING MODE:
To activate the pairing mode, press the lower button in the battery compartment of your Comet WiFi once until “PA“
appears on the display.
FACTORY RESET:
If you want to reset the radiator controller to factory settings, press and hold the lower button in the battery compart-
ment of your Comet WiFi for 10 seconds. From the 5th second, a counter runs on the display of the
thermostat. Keep the button pressed until 10 appears on your Comet Wifi.
