Seite 11
Comet WiFi
A
bb
.
3
5.7 MOUNTING TO THE RADIATOR
Now mount your thermostat on the radiator and start the adaptation after
successful installation. To do this,
hold the two arrow keys on the Comet
WiFi simultaneously for 3 seconds.
Comet WiFi can be easily installed on all known valve bodies (see adapter list
at www.eurotronic.org/service/faq).
1. Unscrew the old thermostat head completely, loosen the fastening and pull it off the valve (Fig. 3).
2. If necessary, select a suitable adapter and mount it on the valve (Fig. 4).
3. Screw the thermostat onto the valve or adapter by turning the union nut clockwise
unscrew (Fig.5).
ATTENTION:
Make sure that your Comet WiFi is also in the adaptation mode when installing / removing it later. Remove the batte-
ries briefly, reinsert the batteries and wait until the motor run is complete and “Ad“ appears on the display. Only mount/
dismount your Comet WiFi in this position.
Abb. 4
NOTE:
On the following pages you will find more detailed information on installing
and adapting your thermostat.
5. INSTALLATION AND START UP
Abb. 5
After adaptation press “Next“.
