Seite 13
Comet WiFi
After installation, Comet WiFi can start with the adaptation. “Ad“ appears in the display. To start the adaptation, hold
down the two arrow keys on your Comet WiFi simultaneously for approx. 3 seconds. After successful adaptation, Comet
WiFi goes into normal operation, the LEDs indicate the target temperature.
Should it be necessary to re-adapt because the thermostat behaves unexpectedly (see section section 9), it is sufficient
to remove the batteries and insert them again after about 10 seconds.
NOTE:
After a battery change, the adaptation process must be run through again.
5.9 INSTALLATION AND START UP
1. After you have mounted your Comet WiFi on the radiator and the once you
have completed the adaptation, you can give your Comet WiFi a name.
5.10 CHOOSING NAME AND ROOM
2. Then add your thermostat to a room.
3. Press the “Save“ button after you have specified a name and room.
NOTE:
If problems occur during storage, switch to the WLAN
Settings of your smartphone and reconnect to your home WiFi network. The pro-
blem may be that your smartphone has not automatically unpaired the connec-
tion to the thermostat again. If you then return to the WiFi Smart Living app, the
saving can be completed without any problems.
