– 4 –
Avoid potential dangers by reading the following safety instructions carefully.
SAFETY INSTRUCTIONS
- Temperature & Humidity Sensor Z-Wave Plus is designed for use in buildings.
- Operate Temperature & Humidity Sensor Z-Wave Plus only as described in the user manual.
- Temperature & Humidity Sensor Z-Wave Plus should only be put to use in a dry and dust-free place, away
from direct sunlight.
- Do not keep using the device when there is obvious damage.
- Temperature & Humidity Sensor Z-Wave Plus may not be rebuilt, modified or opened.
IMPORTANT!
Do not open the device; it does not contain any parts which can be serviced by the user. In the event of
any faults, send the device to the Service Department.
Never attempt to recharge non-rechargeable batteries and do not short circuit or open them. This could
result in the risk of overheating, fire or bursting. Never throw batteries in a fire or water. The batteries
could explode.
Leaking batteries could damage the device. Be particularly careful when handling damaged or leaking
batteries and wear protective gloves.
Switch the device off and remove the batteries if the device will not be used for a longer period.
WARNING!
Risk of fatal injury and accidents to infants and children! The packaging material represents a risk of suff
ocation. Never leave children unattended when the packaging material is nearby.
Children often underestimate the risks involved. Always keep children away from the packaging material.
The device is not a toy.
2. Safety Instructions
