25
4.4.5
Operator Parameters in Level 1
Operator level 1 is designed for day to day operation
of the controller and parameters are not protected by
a passcode.
Press
!
to step through the list of parameters.
The mnemonic of the parameter is shown in the
lower display. After five seconds a scrolling text
description of the parameter appears.
The value of the parameter is shown in the upper
display. Press
▲
or
▼
to adjust this value. If
no key is pressed for 30 seconds the controller
returns to the HOME display
The parameters that appear depend upon the
functions configured. They are:-
Parameter
Mnemonic
Scrolling text and Description
Availability
WRK.OP
WORKING OUTPUT
The active output value
Read only
Shown when the controller is in AUTO or OFF mode.
WKG.SP
WORKING SETPOINT
The active setpoint value.
Read only.
Only shown when the controller is in MAN or OFF mode.
SP1
SETPOINT 1
Alterable
SP2 SETPOINT
2
Alterable
T.REMN
TIME REMAINING
Read only 0:00 to 99.59 hh:mm or mm:ss
DWELL
DWELL TIME Set time
Alterable. Only shown if timer configured.
A1.xxx
ALARM 1 SETPOINT
A2.xxx
ALARM 2 SETPOINT
A3.xxx
ALARM 3 SETPOINT
A4.xxx
ALARM 3 SETPOINT
Read only, and only shown if the alarm is configured.
xxx = alarm type:- HI = High alarm; LO = Low alarm
d.HI = Deviation high; d.LO = Deviation low; d.HI =
Deviation high
