Eurotherm Chessell 4102C, User Manual

Page: 38 / 52

HA249928
Issue 15 Jly 06 Page 34
100 MM RECORDER USER GUIDE
Off 5 10 20 30 60 120
240 300 600 1200 3600 18000 36000
Continuous only.
Annotation (if fitted)
inhibited above 300
mm/hr.
Multipoint and
continuous recorders
All speeds in mm/hr
6.1 TECHNICAL SPECIFICATION (Recorder) (Cont.)
Printing system (continuous trace)
Pen type Disposable fibre-tipped pens
Pen resolution 0.15 mm
Pen colours Channel Colour Channel Colour
1 (top) blue 4 (bottom) violet
2 red annotator black
3 green
Pen life 1.2 km (channel pens); 7.5 x 10 5 dots (annotator)
Update rate 4 Hz
Response time (10 to 90%) 2 sec max.
Annotator characters per line 38
Printing system (multipoint)
Pen type Six-nib cartridge
Print resolution 0.2 mm
Trace colours Channel Colour Channel Colour
1 violet 4 green
2 red 5 blue
3 black 6 brown
Printhead life 1.5 x 10 6 dots per colour
Update rate 2 Hz
Print rate (maximum) 1 pass every 5 seconds
Characters per line 42
Paper transport
Type Stepper motor driving sprocket tube
Chart speeds See table below
Chart type 16-metre z-fold (standard) or 32-metre roll (option)
Transport accuracy 0.5 cm in 16 metres (0.03% approx.)
Power requirements
Line voltage Standard: 90 to 264V 45 to 65 Hz
Enhanced interrupt protection: 90 to 132V 45 to 65 Hz
Low voltage option 20 to 53V dc or ac (45 to 400Hz RMS)
Power (Max) 100VA
Fuse type None
Interrupt protection Standard: 40ms at 75% max. instrument load
Enhanced: 120msec at 75% max. instrument load