ISIS ICE - user manual
16
ETH_ISIS_ICE_USM
Adding the optional hard disc drive
Observe antistatic precautions when dismantling the ISIS ICE and handling the Hard Disc Drive.
To add the optional hard disk drive, follow these steps:
1. Remove the bottom extrusion and rear panel as described in steps 1-4 of
. (You do not need to totally dismantle the enclosure).
2. Fit the hard disk drive to the hard disk drive mounting plate using the four screws and nuts
supplied. Do not tighten the nuts, they should be quite loose.
Before proceeding, check that the orientation of the hard disk drive is correct when the two halves of the
extrusion are fitted together. You can do this by trying out the positions before sliding the hard disk drive
into place.
3. Fit the nuts into the grooves on the extrusion:
M3 screws and nuts
Hard disk drive bracket
Grooves (present
on both sides)
