Adding GPRS, Wi-Fi and PC104 I/O
15
4. Remove the four outermost front and rear M3 Pozidrive screws holding the board in place:
5. Place a medium sized flat bladed screwdriver into the space between the ISIS heatsink and the top
extrusion and twist to free the heat pad from the extrusion:
6. Remove the ISIS board assembly:
The assembly is still attached to the front panel and should not be dismantled further. Access to all
serviceable parts is now available. It should not be necessary to further dismantle the ISIS ICE.
Pozidrive
screws
Flat bladed
screwdriver
