Eurotech ALUDRA, User Manual

Page: 9 / 123

Introduction
Issue A
9
ALUDRA Peripheral Connectors and Jumpers
The ALUDRA has the following connectors on-board:

One ATX power connector for +5V and +12V supplies

One Audio connector

One ATX power control connector

One Backlight inverter connector

One CompactFlash
®
socket

One CRT connector

One Digital input/output (DIO) connector

One Fan connector

One Front panel connector

One IDE disk drive connectors (44-pin)

One Infrared interface (IrDA) connector

One Keyboard/mouse connector

One LVDS connector

One Parallel port connector

One PC/104- Plus slot

One PCI slot

Two PCIe Mini Card slots

Two Gigabit Ethernet (GbE) connectors

Two Serial ATA (SATA) drive connectors

One SDVO connector

Three RS-232 serial port connectors

One RS-232/422/485 serial port connector

One TPM connector

One TV Out connector

Three USB 2.0 connectors (supports six USB 2.0 devices)
The ALUDRA has the following on-board jumpers:

AT power selection

Clear CMOS

CF card setup

LVDS Voltage Selection

LVDS Panel Resolution Selection