ABOUT BELT
CAUTIONS
Do not twist
No bending
Replace new one while sprocket worn.
Rubber compound
Fabric
Fabric
100
℃
-30
℃
Profile K11M H8M
Pitch 11mm 8mm
Material Rubber Rubber
MAINTENANCE AND INSPECTION
WARNING: Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or adjustments, as necessary,
can result in injury to the rider or to others. Make sure all parts are correctly assembled and adjusted as written in this manual.
• Immediately replace any damaged, missing, or badly worn parts
.
• Make sure all fasteners are correctly tightened as written in this manual. Parts that are not tight enough can be lost or op
erate
poorly. Over tightened parts can be damaged. Make sure any r
eplacement fasteners are the correct size and type.
WARNING: Have a bicycle service shop make any repairs or adjustments for which you do not have the correct tools or if the
instructions in this manual are not sufficient for you.
WARNING: Before every ride, it is important to carry out the sa
fety checks detailed on page 8
9.
121
Figure
83
Figure
84
Figure
86
Figure
85
Cord
