SATELLITE RECEIVER
To prevent electric shock, do not remove covers.
Do not cover the ventilation slots on the cover of the
receiver.
Protect the receiver against heat dust, humidity water,
and direct expose to sunshine.
Do not use any chemical detergents for cleaning.
For servicing, always contact a specialist service shop.
Do not operate it on a soft surface (such as carpet)
Only connect the receiver to the AC system and switch it
on once all the connections have been set up.
In the event of a prolonged absence, pull out the mains
plug to disconnect the receiver from the power mains.
on the Front Panel
Channel up/down selection.
F3
Channel display.
F4
Infrared eye.
Standby Switch.
on the
Panel
LNB inputs.
Audio L and R outputs.
Adjust for a proper TV UHF channel.
TSG switch.
UHF modulator output.
R6
UHF/VHF antenna, or cable input.
R7 AC Power Cord.
R 9
VCR
Decoder
.
3. Control on
Bottom of the
Video level adjustment
.
and
4.1
Connect the outputs of your
to the
inputs
of your receiver by using a coaxial cables.
Connect one
socket of your TV set to the TV
socket on your receiver via a
cable.
Switch your TV set to AV mode.
Connect the MAINS plus
of your receiver to a
220VAC home outlet.
