EuroSky SR400 OSD User Manual Download Page 5

 key. There are 3 kinds of channel mode for

selection 

 Normal Channel

F X X X

 Favorite Channel

R X X X

 Radio Channel

 Before selecting LNB, please make sure that the LNB OSC

frequencies have been set in LNB INSTALLATION menu
and match the LNB frequencies specified in LNB
manufacture‘s specification.

 There are 2 selections for the LNB 

 

LNB. 1

1

LNB. 2

2

 Use 

 key to select C Band or KU Band.

 Band will be automatically matched to the LNB

installation:

If LNB frequency is 

 BAND is C Band.

If LNB frequency is 

 (or higher). BAND is KU

Band.

 Use   

   key to select for 4 kinds of OPT and SAT.

OPT/SAT

l/l

1

OFF

1

OPT/SAT

2

OFF

1

OPT/SAT

1

ON

2

OPT/SAT

2

ON

2

Note: This mode is not available on this model.

 There are 4 kinds of Decoder process for selection 

 

NORMAL

Decoder

Decoder

OFF

Receiver

Receiver

Receiver

Decoder

Decoder

Receiver

 Usually, select V EXT mode for a PREMIER decoder, or,

select NORMAL mode for a 

 decoder.

8. 

 Lock

To prevent your children from viewing adult programs, you
can activate the lock for one or several channels.

 Select the program that is to be locked. Example   
 Press   PL” key and the screen shows.

 

.@@

 Then, press 

 key 

 the channel is now locked with

no picture and sound, the screen shows 

 

x

x

 Other channels can be locked one by one in the same way.

TO 

 Call up the locked channel to the screen.

 

x

x

 Press   PL   key and the screen shows.

 

x

x

 

 Enter the pass code number 1269.

 Press 

 key, Picture and sound are restored. screen

shown 

 

 The unlocking for viewing by entering the code numbers

applies for all the program channel with the lock .

 If the receiver is switched off and back on again, the lock

is re-activated and has to be unlocked again with the
number code.

TO 

 

 

To cancel out the channel lock, proceed as follows 

 Select the locked channel and unlock the channel then,

press 

 key and confirm by press 

 key.

 Each locked channel must be 

 out separately.

9. Receiver Lock

to Protect 

 Press “PL” key and four question mark 

 appears on the

 Press 

 key and then, enter the code number 7787.

screen 

 . 

 Enter the code number 7787. the 

 mark disappear and,

 Then, press 

 key to confirm the 

 and the

R/Lock indicator turns off.

then, press 

 key to 

 the Lock, and the 

indicator light up to.

Reviews: