EUROPRO 40095, User Manual

Page: 7 / 36

202203-577-ENG User manual - X-PRO D200 P7
2. WARNING (continued)
2.2. TRANSPORT
• This machine was the object of a road homolagation ( e2*2018/858/XXXX ). As such, it must be
registered and can be thus dragged normally on the road network.
• The following points must be taken into account when transporting by road:
- Observe the national traffic regulations of the country in which the machine is being driven.
- Carry the machine’s registration papers or registration certificate with you.
• The adjustable jockey wheel easily allows you to fix the helm to the harness of your vehicle.
• The adjustable helm gives you the possibility of adjusting the machine horizontally.
• An electric cable provided with a grip allows you to link the device of lighting of the trailer with the
tractor truck.
If you are using a towing vehicle with a 12 V system, you can directly connect the cable to the vehicle.
• A cable of break allows to bind the device of harness of your vehicle with the machine in case of hanging
problem of the helm during a travel.
It is imperative to collide this cable on the harness of the vehicle.
Before any road travel:
• Check the pressure of the pneumatics which has to be 4,5 bar max.
• Check the tightening of the nuts of wheels.
• Check the tightening of the nuts of the articulated helm and the presence of pins.
• Clean reflectors.
• Clean and check the functioning of the device of lighting.
• Collide the cable of break.
This machine is equipped with brakes, as its total authorised weight exceeds the 750 kg
limit set by the applicable European directive.
X-Pro D200 is not a transport trailer, it is strictly forbidden to transport people or products
related to the application of the machine.