EUROPRO 40095, User Manual

Page: 6 / 36

User manual - X-PRO D200 202203-577-ENG P6
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
SAFETY SYSTEMS
This machine has been designed to allow working with the maximum safety.
So safety sensors and emergency stop has been setted on your machine without complicating your work.
We are insisting on your caring to maintain them in good condition and above all not to remove them.
In case of malfunction, please contact immediately your dealer.
HYDRAULIC
This machine is equipped with high pressure hydraulic circuits (210 bar).
The following insctructions are essential for your safety:
• Never tighten a hydraulic connection while the machine is working.
• Never try to wipe an oil drop on a hose or hydraulic component with your finger while the machine
is working.
• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed
immediately).
• Check regularly if the circuit does not have any leak.
• In any case, do not touch hydraulic parts (even when the machine is not working) because the
components shall be hot and there is a burn risk.
SAFETIES AND PROHIBITIONS
• The hopper grid rising up causes the screw movement stop.
• Emergency stop is located on the machine hood. Do not hesitate to use it if needed, this will immediately
stop the motor. To restart the machine after emergency stop button pushed, follow this procedure:
- Put the command buttons in central position.
- Rearm emergency stop.
- Command panel lamps must be lighted-up (green = correct / red = default).
- Engage the starter with the contact key.
- Resume spraying or pumping procedure.