EUROPRO 40095, User Manual

Page: 17 / 36

202203-577-ENG User manual - X-PRO D200 P17
5. DEFECTS AND REMEDIES
n° Defects To check Remedies
1
Dashboard lights do not
illuminate.
The dashboard fuse is out of order. Change the fuse.
The battery connections are bad.
Check both battery terminals. Check the
presence of grey-green, brush the pods.
The battery is out of order or not
charged.
Contact the nearest technical service, the
battery must be changed, pay attention
to the polarities.
The power supply circuit must be swit -
ched off somewhere.
Contact Technical Service.
2 Engine does not start when cold
Check for diesel fuel. Fill up the tank.
Check the quality of the fuel.
Drain the tank, clean and refill with qua -
lity diesel fuel.
Change the filter.
Check fuel filter.
It must be changed regularly, check the
maintenance booklet, change the filter.
The engine has been switched off.
Re-start the engine with the hand pump
(see engine manual) and check the hoses
(air inlet).
Problem with the electrical supply. See problem 1.
Diesel solenoid valve.
Check wire on diesel solenoid valve.
Check emergency stop.
Preheating does not work.
Check the 50A reed switch fuse in the
dashboard housing.
I've already checked all these points, but
it doesn't change anything.
Contact technical service.
3 Engine does not start when hot
First See problem 2.
The engine safety system prevents
starting due to lack of oil pressure.
Check the oil level of the combustion
engine (engine cold).
The safety relay is out of order Contact technical service.
The engine oil pressure sensor is out of
order.
Contact technical service.
4 The diesel engine smokes white
There is water in the diesel fuel.
Drain the tank, clean and refill with
quality diesel fuel.
Change the filter.
Check the injection / Clean the injection Contact technical service.
Cylinder head gasket.
Check the cooling liquid level.
Check engine oil level and texture
("mayonnaise").
5 The diesel engine smokes black
Check engine oil level. If low level contact technical service.
Check the injection / Clean the injection Contact technical service.