User manual - Compact-Pro 30 BASIC
202204-585-ENG
P12
5. DEFECTS AND REMEDIES
Defect
Remedy
• The machine runs but the product does not
come out at the lance.
• Check that the product is not too dry and that
it sinks to the bottom of the tank, dilute it and
mix it well if necessary.
•
Check the condition of the pump with a pressure
controller.
• Change the stator and/or the rotor.
•
The grain changes without changing the setting.
• Unclog the air holes of the nozzle.
• In AUTO mode, air supply connected, lance
open, the machine does not start.
• Check that the air inlet and outlet connections
are properly connected. Clean them if necessary.
•
Remove the flow meter cap attached to the
frame next to the compressor. Pull out the spring
and piston and clean them thoroughly. Do the
reverse operation to reassemble them.
•
The machine does not stop when the lance is
closed.
In case of an unknown defect or a doubt on the good running of the machine, do not try to
repair it by yourself or to dismantle it.
Contact an authorized After-Sale Service or our hotline : +33 4 42 29 08 96.
