11
number can be changed by pressing the <NEXT> key, or by entering the number required
followed by the <ENTER> key. The next prompt is "TO SUITE NO. 255". The default end suite
number is 255. The end suite number can be changed in the same manner as the start suite
number. By accepting the default values, the message will be displayed on all on-line suites.
otherwise it is displayed on the range of suites selected. The <QUITE> key aborts this routine.
14.2 Clear Message Option
The panel displays "CLEARING MESSAGE" and then prompts the user with "FROM SUITE
NO. 1". The default start value is 1 and the default end value is 255. These can be changed as in
14.1. By accepting the default values, the message which was sent to all suites will be cleared,
otherwise the message will be cleared from the displays of the suites in the specified range. The
<QUIT> key aborts this routine.
14.3 Clear Suite Message Option
This option is similar to the Clear Message option. It clears messages being displayed on the
Concierge panel which were sent by suites. As before all or a range of messages may be cleared.
The <QUIT> key aborts this routine.
15. Suite Name Change
Changing or editing the names of Suite units follows the same procedure outlined above (7.1
User Set-up) for changing the user name.
16. Spare Mode
SINGLE KEY FUNCTIONS
KEY
OPERATION
* <FIRE>
Causes alarm and sets relays.
* <PANIC>
Causes alarm.
* <EMERG>
Causes alarm.
* These keys have to be depressed for 3 second or pressed 3 times
in succession.
