13
SUITE USER OPTIONS - DETAIL
1. Disarm
Executes the Disarm literal accepting all alerts on the suite.
Disarming in Disarm mode clears all alerts.
2. Home Arm
Executes the Home Arm literal to Home Arm the suite.
3. Sleep Arm
Executes the Sleep Arm literal to Sleep Arm the suite.
4. Full Arm
Executes the Full Arm literal to Full Arm the suite.
5. User Set-up
(i) The panel prompts "ENTER USER NO.". The default user number
is 1 but another can be selected by using the <NEXT> key or by
entering the number directly. The valid selections are 1,2,3,4,5.
If the user name is to be changed then press the <CHANGE> key and
read (ii). Otherwise press the <ENTER> key and go to (iii).
(ii) The previous name, which may be the default name, is displayed
in the edit mode. This name may be changed by first deleting it
using the <SHIFT> key (maximal length restriction) and then
re-entering it. On completion, press the <ENTER> key with the cursor
in the normal orientation.
(iii) The prompt "ENTER USER CODE ---- " is now displayed. Pressing
the <ENTER> key leaves the code unchanged. (In the case of users
3,4 and 5, the <ENTER> key will not be accepted if no previous
value exists.) Otherwise a 4 digit code may be entered. This code
must not conflict with another user code for that suite.
(iv) The panel will now display "ENTER USER NO. X" where X is the
next user number for that suite. The procedure (i) - (iii) may be
repeated or press the <QUIT> key to exit the option.
