EURONOM Exotic Compact 10, Installation And User Manual

Page: 28 / 74

28
Meny – Function button
This menu gives possibilty to set a function for the button placed on the room sensor unit.
Visning Beskrivning Kommentarer
Choice of function
for button on room
sensor
:
→ ”TEXT”
►
↓
Here you choose what type of function you want the room sensor
button to have when you press the button.
Not used
This is the default setting. Room sensor button is inactivated and
nothing will happen if the button is pressed.
Reset errors
If the system generates some kind of error the button on the room
sensor can be used to reset the error.
(Observe that if the error is still active it cannot be reset with the
button.)
Extra hot water
The function gives the possibility to temporarily increase the hot
water performance of the Exotic Compact. This function can be
used if for example many people need to shower quickly after
each other, many showers used at the same time or if a bigger
bath tub/Jacuzzi should be filled.
Deactivate room sensor
This function is of interest if you for example have an open
fireplace placed in the same room as the sensor. When you add
heat to the room with the fire place the sensor will stop the heat
to the complete heating system, i.e. all rooms will be affected.
However, if you use this function you can set a time delay in hours
for blocking of the sensor when you want to use the fire place.
When you press the button the activation will be confirmed by 2
blinks from the red diode
Funktion: Extra
domestic hot water.
Extra heat valid
During:
→ 30min
►
↓
If the function extra hot water is chosen also this display will be
available. Here you can set for how long time you want the
function to be active.
(Observe! It can take 15 ‐ 30min for the heat pump to increase the
tank temperature enough)
Only displayed if extra
hot water is chosen.
Function: Deactivate
room sensor
Room sensor is deac-
tivated during:
→ 4h
►
If you have chosen the function deactivate room sensor this
display will be available. Here you can choose for how long time
you wat to deactivate the room sensor when the button is
pressed. After the set time delay the room sensor will return to
normal mode again and start to adjust the heating curve.
Only displayed if
deactivare room
sensor is chosen.