9
6.
Put the hood into the cabinet, tighten up the screws by screwdriver, and make sure
the hood was fixed. See
Pic 4.
Pic 4
7.
Connect the light wire and
assemble the outer glass frame panel by screw.
8.Install the
outlet and expansion
pipe: install
the outlet on the Rangehood, and equip
the expansion pipe on the outlet then lead it to outdoor. See
Pic 4.
9.
Unscrew the 8 pcs ST4*14mm
screws, and dismantle the outlet mesh cover, see
pic 5
. Note: There is no need to unscrew the 4 screws showing on pic
6.
Pic 5
Pic 6
10. Install the outlet seal ring and outlet, using
the 8 pcs ST4*14mm screws in step
9 to
fix them. See pic7.
11. Install case installation bracket, and fix with 4 pcs M4 screws, spring washers and
gaskets. See pic
8
.
Pic 7
Pic 8
