17
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is
clean and well wrung before
cleaning. Use a dry soft cloth to remove
any excess
moisture left after cleaning.
Important
Using neutral detergent
s and avoid using harsh cleaning chemicals, strong household
detergents or products containing abrasives, as this will affect the appliance
appearance and potentially remove any printing of artwork on the control panel and
will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minutes in water with
a grease-loosening detergent then brush it
gently with a soft brush. Please do not
apply too much pressure, avoid to damage it. (Leave to dry naturally out of direct sun
light)
Filters should be washed separately to crockery
and kitchen utensils. it is advisable
not to use rinse aid.
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps.
-
Angle the filter into slots at the back of the hood.
-
Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
