18
BULB REPLACEMENT
Important:
The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
Always switch off the
electricity supply before carrying out
any operations on the appliance. When handling bulb, make
sure it is completely cooldown before any direct contact to
hands.
When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
Change the LED light
Note:
Before changing the lights, make sure that the appliance is plugged off.
Protect against danger when changing lights, such as
wearing gloves.
Light replacement should be carried out by qualified service personnel only.
Switch the unit off and pull out the plug first.
Loose the 4 pcs 4X10MM screws at the back of case, and then take out the outer
glass.
Loose the 2 pcs screws on the lamp bracket, and then change the LED light. See
pic below.
Remove the grease filter.
Unscrew the 4pcs screws on the LED light strip bracket by cross screwdriver,
dismantle the LED light strip and pull out the terminal of the light connecting wire.
See pic 1. (
Note: It will need to dismantle the front panel first for models cannot
directly take down the light strip.)
Apply the reverse procedure to install the light strip back.
•
ILCOS D code for this lamp is:
DSL-7-S-650
–
Max wattage: 7 W
–
Voltage range: DC 12V
