Euromag EUROSONIC 2000 HH, User Manual

Page: 10 / 80

10 | EUROMAG
1.5 TYPICAL APPLICATIONS
The Eurosonic 2000 HH hand held flow meter can be
applied to a wide range of pipe flow measurements.
The pipe size ranges 0.5”-240” (15mm-6000mm). A
variety of liquid applications can be accommodated:
ultra-pure liquids, potable water, oil, chemicals,
raw sewage, reclaimed water, cooling water, river
water, sea water, plant effluent, etc. Because the
transducers are non-contacting and have no moving
parts, the flow meter will not be affected by flow
pressure or liquid properties. Standard transducers
are rated to 100ºC. Higher temperatures can be
accommodated. For further information, please
consult the manufacturer for assistance.
1.6 DATA INTEGRITY AND BUILT IN TIME KEEPER
All user-entered configuration values are stored in
the built-in non-volatile flash memory that can retain
the data for over 100 years, even when the power is
lost or turned off. Password protection is provided to
avoid inadvertent configuration changes or totalizer
resets.
A time-keeper is integrated in the flow meter. It works
as the time base for flow totalizing. The time-keeper
remains operating as long as the battery’s terminal
voltage is over 1.5V. In case of battery failure, the
time-keeper will not keep running and the time data
will lost. The user must re-enter proper time values
after the battery failure is recovered. Improper time
values will affect the totalizers as well as many other
functions.
1.7 PRODUCT IDENTIFICATION
Each set of the hand held flow meter series flow
meter has a unique product identification number
or ESN written into the software that can only be
modified with a special tool by the manufacturer.
In case of any hardware failure, please provide this
number which is located on menu window M61 when
contacting the manufacturer.
EUROSONIC 2000 HH