Voyager 3000 User Guide
4-2
Accessing the VOYAGER 3000 Menus
Connecting a Monitor
The VOYAGER 3000 is shipped with a serial cable for making the connection from the
options board at the rear of the system to an external monitor. To use the monitor utility, run
the cable from the VOYAGER 3000 to your monitor. The terminal should be configured as
shown in Table 4-1 and set up for VT100 emulation.
Table 4-1 RS232 Terminal Settings
Parameter
Value
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
Emulating a Monitor
If you do not have a dedicated monitor at your disposal, you can still access the VOYAGER
3000 monitor utility by using a PC and communications software to emulate a monitor. In this
example, we will use the Microsoft Windows V3.X
11
Terminal program.
11
Windows 95 users can use HyperTerminal
Figure 4-2 Logical View of VOYAGER 3001
Channel 1
Channel 0
Controller
Power
Supply
Drive SCSI
Drive SCSI
Host SCSI
Host
System
Channel
2
Top 3 drives on
VRA-3001
Bottom 3 drives on
VRA-3001
