background image

CC-90

EMPTY

Active Servo

Technology

Natural Sound Mini Component System

CC-90 is composed of CTX-S90, MX-S90, CDC-S90, 
KX-S90 and NX-S90.

OWNER’S MANUAL

CONTENTS

IMPORTANT!
Please record the serial number of this unit in the
space below.

Model:
Serial No.:

The serial number is located on the rear of the
unit.
Retain this Owner’s Manual in a safe place for
future reference.

Page

SAFETY INSTRUCTIONS.......................Inside Front Cover-1
INTRODUCTION....................................................................2
FEATURES ............................................................................2
SUPPLIED ACCESSORIES...................................................2
PRECAUTIONS .....................................................................3
NAMES OF CONTROLS, INDICATORS AND
REAR PANEL PARTS.........................................................4-6
REMOTE CONTROL TRANSMITTER ................................7-9
REMOVING THE FRONT GRILLE
(for Speaker System NX-S90 only).........................................9
PREPARATION FOR USE..............................................10-12
OPEN/CLOSE THE CONTROL DOOR................................13
TURNING THE POWER ON/OFF TO THIS SYSTEM .........13
SETTING THE CLOCK.........................................................14

Page

SOUND CONTROL ..............................................................15
COMPACT DISC PLAYER OPERATION........................15-22
TUNING OPERATION.....................................................23-25
TAPE DECK OPERATION  .............................................26-28
RECORDING COMPACT DISCS....................................29-34
OTHER RECORDINGS...................................................35-36
HOW TO USE THE BUILT-IN TIMER .............................37-40
USING EXTERNAL UNITS .............................................41-42
MAINTENANCE....................................................................42
SPECIFICATIONS................................................................43
TROUBLESHOOTING..........................................................44
ACTIVE SERVO TECHNOLOGY 
(for Speaker System NX-S90 only).......................................45

Summary of Contents for CC-90

















































Reviews: