Voyager 3000 User Guide
5-6
SCSI Reset at Power-Up Setting
1 Press
ENT
for two seconds for the Main Menu.
2
Press
t
or
s
to
select Edit SCSI Reset at Power-up
and press
ENT
.
Edit SCSI Reset
at Power-up ..
3
Press
ENT
for two seconds to change from enable to
disable or vice versa.
Disable SCSI Reset
at Power up?
The controller must be reset (e.g., by powering-off then on again, by executing "Reset This
Controller" via LCD interface, etc.) for this to take effect.
Sequential Drive Spin-Up Setting
To prevent overloading the power supply when several drives turn on at the same time, the
VOYAGER 3000 can sequence the drives to start spinning in succession at five seconds
interval. This is not necessary with the VOYAGER 3000 Power Supply Units
To use this option:
1
Press
ENT
for two seconds for the Main
Menu.
2
Press
t
or
s
to select
Edit Drive Spin-up
and press
ENT
.
Edit
Drive Spin-up ..
3
Press
ENT
for two seconds to change from enable to
disable or vice versa.
Disable Drive
Disk Spin-up ?
The controller must be reset (e.g., by powering-off then on again, by executing "Reset This
Controller" via LCD interface, etc.) for this to take effect.
Data Cache Setting
1
Press
ENT
for two seconds for the Main
Menu.
2
Press
t
or
s
to select
Edit Data Cache
and
press
ENT
.
Edit
Data Cache ..
3
Press
ENT
for two seconds to change from enable to
disable or vice versa.
Disable
Data Cache ?
The controller must be reset (e.g., by powering-off then on again, by executing
Reset This
Controller
via LCD interface, etc.) for this to take effect.
Viewing Connected Drives
1
Press
ENT
for two seconds for the Main
Menu.
2
Press
t
or
s
to select
View SCSI Drives
and press
ENT
.
View
SCSI Drives ..
