Voyager 3000 User Guide
1-4
This system will typically be used in similar situations to that described within the VRA-
3001T-XX-Y section on page 1-2 but with larger capacity requirements.
The VRA-3002T-XX-Y is configured as two SCSI buses. The first SCSI channel is connected
to the top three drives in the first shelf (left hand side) which are set up as SCSI Ids 0
à
2. The
cable is then routed to the top four drives in the second shelf. These drives are set up as SCSI
Ids 3
à
6. The second channel is connected to the bottom three drives in the first shelf which
are configured as SCSI Ids 0
à
2 and looped to the second shelf to connect to the bottom three
drives which are set up at SCSI Ids 3
à
5. Refer to Figure 1-4 for a schematic view of the
interconnects. Each of the systems described are also available with differential host SCSI
buses giving an overall host cable length of 25 metres.
Figure 1-4 VRA-3002T-XX-Y SCSI target interconnects
