00049059.DOC, Version 1.0
35/38
Control Board
The Control Board offers several features: you can simply set the starting address, switch on and off the
lamp, run the pre-programmed program or make a reset.
The main menu is accessed by pressing the encoder until the display is lit. Browse through the menu by
turning the encoder. Press the encoder in order to select the desired menu. You can change the selection by
turning the encoder. Press the encoder in order to confirm. You can leave every mode via the menu item
"Exit". The functions provided are described in the following sections.
Main menu
Sub menu
Display
Function
Information
Type designation, software version,
lamp running time
DMX address
(XXX) ~ 1-512
DMX address setting
PAN Reverse
ON/OFF
TILT Reverse
ON/OFF
Reverse movement
PAN/TILT Speed
(XX) ~ 1-15
Adjust PAN/TILT speed
PAN/TILT Mode
16bit/8bit
16-bit movement switch from 16 bit to
8 bit resolution
Lamp Mode
ON/OFF
Lamp on/off
Reset
Lighting
Lamp time zero
Motor zero
Exit
***
***
Restore factory setting
Clear lamp time
Reset
password „123“
Channel Test
PAN
TILT
PAN/TILT Speed
...
Exit
PAN (000)
TILT (000)
PAN/TILT (000)
...
Test function of each channel
Display
Language
Backlight time
Back-brightness
English
Open/30 seconds
(X) ~ 1-4
Display language
Display shutoff time
Display brightness
Motor Adjust
PAN
TILT
Color wheel
...
Motor zero
Save
Exit
PAN (-00)
TILT (-00)
Color wheel (-00)
...
***
***
Initial effect position
Reset
Save current setting
password „123“
Control
Control Select
Auto run program
Auto run speed
Exit
DMX/Auto/
Sound/Slave
1-9
1-15
Operating mode, adjustment built-in
programs
Help
Manufacturer information
Exit
Version Info
With this function you can display the type designation, the software version of the device, and the running
time of the lamp.
DMX address setting
With this function you can adjust the DMX address.
