00066323.DOC, Version 1.0
25/30
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last device in the link in order to
ensure proper transmission on the DMX data link.
DMX-protocol
4 DMX channel mode
Control-channel 1- Horizontal movement (PAN)
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be stopped at any position you wish.
Control-channel 2 - Vertical movement (TILT)
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be stopped at any position you wish.
Control-channel 3 - Color macros
Decimal Hexad. Percentage S/F
Feature
0 15
00 0F
0% 6%
S Blackout
16 31
10 1F
6% 12%
S Red
32 47
20 2F
13% 18%
S Green
48 63
30 3F
19% 25%
S Blue
64 79
40 4F
25% 31%
S White
80 95
50 5F
31% 37%
S Red/green
96 111
60 6F
38% 44%
S Red/blue
112 127
70 7F
44% 50%
S Red/white
128 143
80 8F
50% 56%
S Green/blue
144 159
90 9F
56% 62%
S Green/white
160 175 A0 AF
63% 69%
S Blue/white
176 191 B0 BF
69% 75%
S Red/green/blue
192 207 C0 CF
75% 81%
S Red/geen/white
208 223 D0 DF
82% 87%
S Green/blue/white
224 239 E0 EF
88% 94%
S Blue/red/white
240 255
F0 FF
94% 100%
S Red/blue/geen/white
Control-channel 4 - Switching the LEDs, Strobe, Reset
Decimal Hexad. Percentage S/F
Feature
0 20
00 14
0% 8%
S Neutral
21 30
15 1E
8% 12%
S Reset
31 200
1F C8
12% 78%
F Strobe-effect with increasing speed
201 250 C9 FA
79% 98%
F Random strobe-effect with increasing speed
251 255 FB FF
98% 100%
S Open
