00111950.DOCX, Version 1.1
25/32
Automatic mode
1
Press the button
MENU
so many times until
AUT
appears on the display and confirm with
ENTER
.
2
Use the buttons
UP
and
DOWN
to select the number of the desired program (AU01-AU14).
3
Confirm with the
ENTER
button. The display indicates menu item running speed.
4
Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
S.01
(slow) to
S.100
(fast).
5
Confirm with the
ENTER
button.
Sound control
1
Press the button
MENU
so many times until
SOU
appears on the display and confirm with
ENTER
.
2
Use the buttons
UP
and
DOWN
to select the number of the desired program (SO01- SO14).
3
Confirm with the
ENTER
button.
4
Adjust the microphone sensitivity to the volume of the music with the
SENSITIVITY
rotary dial. The LEDs
and the laser will switch off after 5 seconds if the volume is too low or if there is no sufficient bass beat.
Master/slave operation with several laser bars
When several devices are interconnected, the slave units can be synchronized and controlled with the
master unit. The units must be set to the corresponding operating modes.
1
Set all slave units to slave mode: Press the button
MENU
so many times until
SLA
apears on the
display. Confirm with the
ENTER
button.
2
Set the master unit to the desired show program. The interconnected show lasers will now operate
synchronously.
Remote control IR-16
The IR remote control allows convenient control of the integrated show programs in automatic mode or
sound-controlled mode. Press the buttons repeatedly to switch between the programs. The display indicates
the current setting. When actuating a button, always hold the remote control in the direction of the sensor at
the control unit’s front or rear. There must be visual connection between the remote control and the sensor.
Note:
Operation via IR remote control not possible in DMX or slave mode.
Button
Function
On/off
Auto mode: Repeated pressing switches programs from 1 - 14
Sound control: Repeated pressing switches programs from 1 - 14
Pause
Decreasing speed in Auto mode
Increasing speed in Auto mode
No function
–
Speed adjustment: 0 is lowest, 9 is highest speed
Switches between Auto mode and Sound control
No function
Summary of Contents for LED Multi FX Laser Bar
Page 1: ......
