00111950.DOCX, Version 1.1
22/32
DESCRIPTION OF THE DEVICE
(1) SMD LEDs
(2) Laser output aperture
(3)
RGBAW LEDs
(4) UV LEDs
(5) Infrared sensor for the remote control
(6) Safety eyelet
(7) DMX output
(8) DMX input
(9) Indicator for DMX mode
(10) Indicator for sound control
(11) Display with operation buttons
(12) Indicator for automatic mode
(13) Indicator for slave mode
(14) Microphone
(15) Rotary control for sensitivity
(16) Mounting bracket
(17) Fixations screw
(18) Power feed-through output
(19) Power input
(20) Fuse holder
INSTALLATION
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
DANGER! Damage caused by laser radiation
Observe the chapter safety instructions when installing the device.
The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must
never be fixed swinging freely in the room.
1
The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2
Block access below the work area and work from a stable platform when installing the device.
3
Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the “Accessories” section for a list of suitable rigging hardware.
1
2
3
4
3
4
3
2
1
5
6
7
8
10 11 12
14 15
9
16 17
13
18 19 20
Summary of Contents for LED Multi FX Laser Bar
Page 1: ......
