25
•
EN
DMX OPERATION
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the showlaser is equipped with 13 control channels. To be
able to operate the showlaser with a DMX controller, the DMX starting address must be set for the first DMX
channel. The starting address depends upon which DMX controller is being used. Please refer to the controller’s
documentation.
1
Press the
MENU
button so many times until
Addr
is indicated in the display. Confirm with the
ENTER
button.
2
Use the
UP
and
DOWN
buttons to set the address.
3
A dot will light up when DMX signals are being received.
Functions in DMX mode
Channel
DMX value
Function
1
000 - 255 Red 0-100 %
2
000 - 255 Green 0-100 %
3
000 - 255 Blue 0-100 %
4
000 - 255 White 0-100 %
5
000 - 009 no strobe effect
010 - 255 Strobe effect (slow > fast)
6
000 - 255 Dimmer 0-100 %
7
000 - 009 Laser off
010 - 127 Red laser on
128 - 199 Green laser on
200 - 255 Red and green laser on
8
000 - 009 no strobe effect
010 - 255 Laser beams with strobe effect (slow > fast)
9
000 - 127 Index
128 - 255 Rotation with increasing speed
10
000 - 127 Positioning 0-360°
128 - 255 Rotation with increasing speed
11
000 - 009 No show program
010 - 099 Show program 1: LED derby
100 - 149 Show program 2: laser
150 - 199 Show program 3: LED derby + laser
200 - 255 Show program 4: LED derby + laser
12
000 - 255 Running speed show program 1-3 (slow > fast)
13
000 - 127 Automatic mode show programs 1-4
128 - 255 Sound control show programs 1-4
