26
•
EN
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. The lenses, in particular, should be clean to ensure that light
will be emitted at maximum brightness. Please use a soft lint-free and moistened cloth. Never use alcohol or
solvents! Before cleaning, disconnect the device from the power supply. Make sure that no liquids can enter the
device.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are only
to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. If defective, please dispose of the unusable device in
accordance with the current legal regulations. Should you have further questions, please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before replacing
the fuse, unplug mains lead.
Procedure:
•
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
•
Step 2: Remove the old fuse from the fuse holder.
•
Step 3: Install the new fuse in the fuse holder.
•
Step 4: Replace the fuse holder in the housing.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz
Power consumption:
80 W
Fuse:
T1A/250V
Laser classification:
2M
Laser modules:
Red 100 mW, green 30 mW
Wavelength:
Red 650 nm, green 532 nm
LED:
1 x 4in1 RGBW, 30 W
DMX channels:
13
DMX512 connection:
3-pin XLR
Sound control:
via built-in microphone
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
c
:
55° C
Battery/remote control:
CR2025 button cell 3 V
Dimensions (LxWxH):
200 x 210 x 220 mm
Weight:
2 kg
Specifications are subject to change without notice due to product improvements.
Accessories
No. 59006856
TPC-10 Coupler, silver
No. 59006858
TPC-10 Coupler, black
No. 58010310
Safety bond A 3x600mm up to 5kg, silver
No. 58010342
Safety bond A 3x600mm up to 5kg, black
