21
•
EN
Fixation screw
INSTALLATION
WARNING!
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the
device is installed securely and cannot fall down. The installation must be carried out by a specialist
who is familiar with the hazards and the relevant regulations. The commissioning, operation and
maintenance of this product may only be carried out by qualified personnel.
DANGER!
Damage caused by laser radiation
Observe the warnings on page 18 when installing the device.
This product is designed for overhead rigging only. Mount it to a wall or ceiling with the mounting bracket. If
necessary, it can also be fastened to a truss using appropriate clamps. To align the unit, release the fixation
screws at the mounting bracket, adjust the desired inclination angle and retighten the fixation screws. Make sure
not to point the laser beams at highly reflective surfaces such as mirror balls, windows and shiny objects. As a
precaution, remove or cover up highly reflective objects in order to avoid laser reflections.
Notes
•
The device must be mounted out of normal reach.
•
During installation and service work, the area below the installation location must be blocked.
•
The installation of the device has to be built and constructed in a way that it can hold ten times the weight for
one hour without any harming deformation.
•
The device must be additionally secured with e.g. an appropriate safety bond. Pull the safety bond through the
safety eyelet and fasten it in such a way that, in the event of a fall, the maximum drop distance of the device will
not exceed 20 cm. This secondary safety attachment must be constructed in a way that no part of the installation
can fall down if the main attachment fails.
•
The safety bonds, quick links, shackles and the carbines must be sufficiently dimensioned and used correctly in
accordance with the latest industrial safety regulations.
•
After installation, this product requires inspections periodically to prevent the possibility of rot, deformation and
looseness.
Truss mounting clamp
Safety bond
Mounting bracket
