00133036, Version 1.0
30/44
DMX512 CONTROL
You can control the device individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
QuickDMX
Connect the transmitter to the DMX controller. Set each transmitter and the AKKU Bar-3 Glow into operation.
Press the function button to activate QuickDMX.
The QuickDMX status indicator shortly flashes red, green and blue. Afterward, it lights permanently
according to the selected transmission channel.
Set each transmitter and receiver to the same transmission channel. For this purpose, press the ID button on
the device.
The selected transmission channel is indicated by the status indicator.
Channel
Color
1
Red
2
Green
3
Blue
4
Yellow (red/green)
5
Cyan (green/blue)
6
Magenta (red/blue)
Thus, the wireless DMX network is set up and the receivers are paired to the transmitter. The assignment of
the receivers to the transmitter is kept memorized even after disconnecting the power supply. As soon as the
transmitter receives a DMX signal, the status indicator switches to red. Shortly afterward, the green status
indicators of the receivers and a point in the display start flashing to indicate that the DMX signal is being
received. The DMX-controlled units can now be controlled via radio.
After the operation, disconnect the mains plug of the power supply unit from the mains outlet, to prevent
unnecessary power consumption.
Transmission modes
Several receivers may be assigned to a transmitter. It is possible to operate a maximum of 512 receivers.
QuickDMX allows creating reliable point-to-point, point-to-multipoint and even multipoint-to-multipoint
installations over large distances and in any environment (please refer to the controller’s documentation). A
single QuickDMX transmitter transmits all 512 DMX channels to a maximum of 512 spotlights. It is possible
to operate 6 transmitters at the same time in order to control a total of 3072 DMX channels. The maximum
range is 400 m.
Transmission 1:1
The DMX signal is fed to a transmitter which sends it via RF. A receiver with the same transmission channel
receives the RF signal and distributes it as a DMX signal.
Summary of Contents for AKKU Bar-3
Page 1: ......
