00133036, Version 1.0
36/44
Remote control IR-13
The remote control has the following functions:
Brightness up
Brightness
down
OFF
ON
R
ed
G
reen
B
lue
W
hite
100% R + 24% G
90% G + 23% B
22% R + 87% B
50% / 100%
power
100% R + 47% G
82% G + 46% B
48% R + 75% B
Strobe effect
100% R + 71% G
72% G + 69% B
67% R + 62% B
Color Fading
100% R + 100% G
100% G + 100% B
100% R + 100%B
Color Switching
The device features a memory function. The last program selected will begin anew when the device is
restarted.
Notes:
•
When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
•
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote
control is not possible.
•
If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the
remote control press the small bar with the groove to the right and at the same
time remove the battery support. For operation, one 3 V button cell type CR 2032
is required. When inserting, pay attention that the positive pole of the button cell
shows upwards in the support.
•
Remove the battery from the remote control as a precaution if the device is not
used for a longer period of time.
Summary of Contents for AKKU Bar-3
Page 1: ......
