00101614, Version 1.1
32/36
EUROLITE IR-7 remote control
1
The device must be activated for remote control. For this,
under menu item InFr, press the ENTER button to confirm
activation.
2
When actuating a button, always hold the remote control in
the direction of the sensor. There must be visual connection
between the remote control and the sensor.
3
The remote control is supplied with a battery inserted. An
insulating foil between the battery and the battery contacts
prevents the battery from being discharged during storage.
Prior to the first operation remove the foil from the battery
support on the rear side of the remote
control. Otherwise operation of the remote
control is not possible.
4
If the range of the remote control decreases
(10 meters as a maximum), replace the battery. For this
purpose, on the rear side of the remote control press the
small bar with the groove to the right and at the same time
remove the battery support. For operation, one 3 V button
cell type CR 2025 is required. When inserting, pay attention
that the positive pole of the button cell shows upwards in
the support.
CAUTION!
Danger of explosion when battery is replaced improperly. Only replace by the same type.
Key (Step 1)
Step 2
Description
BLACKOUT
Blackout
AUTO
+/-
Internal programs
SOUND
+/-
Sound controlled internal programs
STROBE
+/-
Strobe effect - available for AUTO / SOUND programs
SPEED
+/-
Select the desired speed for AUTO / SOUND programs
SENSITIVITY
+/-
Microphone sensitivity
DMX/%
Enables or disables DMX mode on the device
MANUAL
Choose the desired color via the buttons:
R/G/B/A/W/UV
+/-
Adjust brightness manually
Numbers: 1-9
Adjust brightness for AUTO / SOUND / MANUAL programs
Battery Directive
Never dispose of discharged batteries or defective rechargeable batteries in the household waste.
Please take them to a special waste disposal or a collection container at your retailer.
