00101614, Version 1.1
28/36
Mode
Program
Description
Auto
Au-1
Auto programs (Master mode)
Program 1
Program 2
Au-2
Sound
So-1
Sound controlled mode (Master mode)
Program 1
Program 2
So-2
Speed
SP 1—SP9
Select the desired speed
(increasing)
Sensitivity
Se 1—Se9
Microphone sensitivity
Sound controlled mode
(increasing)
Silent scene
OFF
Program continues automatically during periods without music or
bass-beat
ON
Program does not automatically continue during periods without
music or bass-beat
InFr
ON
Control via IR remote
: enable
OFF
Control via IR remote
: disenable
Addr
4CH
Setting DMX channel mode / DMX address setting
d 001~d 512 4 channels DMX mode
d 001~d 512 6 channels DMX mode
d 001~d 512 9 channels DMX mode
d 001~d 512 36 channels DMX mode
d 001~d 512 38 channels DMX mode
6CH
9CH
36CH
38CH
Slave
Slav
Slave
RGB
Color presets (Master-mode)
000 ~ 255
Red
000 ~ 255
Green
000 ~ 255
Blue
000 ~ 255
White
000 ~ 255
Amber
000 ~ 255
UV
Dimmer
000 ~ 255
Increasing brightness (0 ~ 100%)
Display
diSP
Display normal
dSIP
Display inverted
DMX-CONTROLLED OPERATION
You can control the devices individually via your DMX-controller.
DMX-Mode
The device has three different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Press the MODE button until the display shows
Addr.
Press ENTER to confirm.
Select the desired DMX Channel Mode 4CH / 6CH / 9CH / 36CH / 38CH and again press ENTER to confirm.
You can now set the desired address via the UP or DOWN buttons. Press ENTER once again to confirm.
Press the MODE button in order to return to the main menu.
Please, be sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain.
If several devices are addressed similarly, they will work synchronically.
