EuroLite 51930401, User Manual

Page: 29 / 36

00101614, Version 1.1 29/36
Controlling
After having addressed the LED PIX-6 HCL Bar, you may now start operating it via your lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received at the DMX-input, the display will show a blinking dot. If there is no data received at the DMX-
input, the display will not show a blinking dot.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective,
- the cable or connector is defective or the signal wires are swap in the input connector.
DMX protocol
4 channel mode
Channel: Value: Function:
1
000 - 255 Dimmer
2
000 - 009 No function
010 - 255 Strobe with increasing speed
3
000 - 009 No function
010 - 019 Red
020 - 029 Green
030 - 039 Blue
040 - 049 White
050 - 059 Amber
060 - 069 UV
070 - 079 Red + Green
080 - 089 Red + Blue
090 - 099 Red + White
100 - 109 Red + Amber
110 - 119 Red + UV
120 - 129 Green + Blue
130 - 139 Green + White
140 - 149 Green + Amber
150 - 159 Green + UV
160 - 169 Red + Green + Blue
170 - 179 Green + Blue + White
180 - 189 Blue + White + Amber
190 - 199 White + Amber + UV
200 - 209 Amber + UV + Red
210 - 219 Red + Blue + White + UV
220 - 229 Red + Green + White + UV
230 - 239 Red + Green + White +Amber
240 - 249 Green + Blue + White + UV
250 - 255 Red + Green + Blue + White + Amber + UV
4
000 - 009 No function
010 - 119 Auto mode via DMX with increasing speed
120 - 255 Sound mode via DMX with increasing speed
6 channel mode
Channel: Value: Function:
1 000 - 255 Red
2 000 - 255 Green
3 000 - 255 Blue
4 000 - 255 White
5 000 - 255 Amber
6 000 - 255 UV