© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan 2013
Instructions Part Number IN1213 Ed.B1
21
The kindling wood should be placed over the paper so as to rest
against each other in a conical formation, leaving space between
each piece.
Light the paper using a long match or spill and close the stove
door.
The lightly crumpled paper will begin burning rapidly and the space
between the kindling will allow the long bright flames to pass
between and over the wood raising it to its ignition temperature.
Wait until the kindling fire core has lost its large flames and
is glowing then, wearing the glove, lay several pieces of
kindling on the top of them followed by pieces of coal.
Try to leave open spaces between pieces of coal with some bridging
others rather than a single layer. Putting on too much at this stage
will only cause smoke and hinder the fire’s development.
When the loading of coal is burning brightly, the air
volume should be reduced and set to the 3 O’clock
position, indicated by the number 6, or lower
depending on the burn rate required.
If you are burning one of the manufactured smokeless
coals the air direction lever should always remain in
the mid, 12 o’clock, position.
If you are burning Anthracite, the air direction control
should now be rotated fully clockwise, 3 o’clock
position.
6
5
4
3
2
1
WOOD
COAL
Manufactured
Smokeless Coal
Anthracite
WOOD
COAL