© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan 2013
Instructions Part Number IN1213 Ed.B1
13
Having learned where to find the controls, you are now ready to light a wood
fire in the stove, without filling the stove or neighbourhood with smoke. You
will need two pieces of newspaper, a small bundle of kindling wood and
several split logs. All of these should be as dry as possible; never use wet
wood, it will cause smoke, deposit tar in the stove and flue to become a
potential fire hazard.
Remember that your stove needs the help of a gentle push start in the right
direction until it warms. Do not expect it to be on auto pilot until it reaches its
operating temperature.
ACME
Ensure the ash pan is fitted and empty, then
securely close the ash pan door.
Set the Plexus control to maximum air volume by rotating the right hand control clockwise until it reaches a stop,
at position 6, then pushing the control knob inwards and turning another quarter turn clockwise to the lighting,
6 o’clock, position. The left hand air direction control to its mid, 12 o’clock, position, supplying air above and
below the grate.
Lightly crumple two tabloid sized pieces of newspaper and
lay them in the middle of the grate.
Resist the temptation to use more paper than this, or
to crumple it too tightly; doing either will prevent the
rapid development of flames and will cause smoke to be
produced.
Getting Started With Wood
WOOD
COAL
Set to Mid Position
Set to Lighting position
6
5
4
3
2
1
