© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan 2013
Instructions Part Number IN1213 Ed B1
20
ACME
Getting Started With Coal
(solid mineral fuel)
Having learned where to find the controls, you are now ready to light
a coal fire in the stove, without filling the stove or neighbourhood
with smoke. To light the fire with wood you will need two pieces of
newspaper, a small bundle of kindling wood, and smokeless coal.
Remember that your stove needs your help to gently push start it in the
right direction until it warms. Do not expect it to be on auto pilot until it
reaches its operating temperature.
Ensure the ash pan is fitted and empty,
then securely close the ash pan door.
Lightly crumple two tabloid sized pieces of newspaper and lay
them in the middle of the grate.
Resist the temptation to use more paper than this, or to crumple
it too tightly; doing either will prevent the rapid development
of flames and will cause smoke to be produced.
Set the Plexus control to maximum air volume by rotating the right hand control clockwise until it reaches a
stop at the position 6, then pushing the control knob inwards and turning another quarter turn clockwise to the
lighting position. The left hand air direction control to mid, 12 o’clock, position, supplying air above and below
the grate.
Set to Mid Position
Set to Lighting position
WOOD
COAL
6
5
4
3
2
1
